Step-by-Step Guide on Making your Own Theme

June 5th, 2008

We have been receiving comments asking for a step-by-step guide on how to set-up or make your own theme. We have provided several tutorials and this post will simply layout the steps you need to do and direct you to each specific tutorials. Let this be your simple guide to start making your own theme by constructing your own CSS.

    1. Decide how you want your page to look like. This layout of your page will depend on the Base Themes. The most popular and simple base theme to use and tweak is the Avlack, Sandskrit and Shadow Box. These base themes have the rail body which bears the headshot on the right side while the contents are aligned on the left. RedFrog Base theme have the contents on the right and the rail on the left. If you want an extended wide lay-out, you can settle for Skyline. There are more Base Themes to choose from. You can see how the Base Themes look like in our post Base Themes and their CSS.
    2. Copy the CSS Codes of the Base Theme that you have chosen. Get the codes in our post Base Themes and their CSS. Open Notepad and paste the Base Code there.
    3. Have the images you want to work with ready. If you want to make your own banner or personalize your footer, now is the best time to work with it. The following tutorials will help you in doing so:

      Making a Banner with your Photo
      Animate your Banner
      How to Personalize Footer
    4. Upload the images you have including the image you want for your background in a Image-Hosting site like Photobucket, Multiply, and others.
    5. Once your images are uploaded on the image hosting site and copy the URL. Use our post on Your Page and CSS Code to know which part of the CSS you need to put the URL of your image.

    For example, if you have your banner image’s URL copied, paste it on background part of the specified CSS:

    div.owner_nav {background:URL of Banner Image;}

    For the Footer Image, paste it on the background part of the specified CSS below:

    div#ownedfooter {background:URL of Banner Image;}

    For the background of the entire page commonly known as body background, paste it on on the background part of the specified CSS below:

    body {background:URL of Banner Image;}

    Note: The banner and footer images should have the same dimension to avoid misalignment. If you’re a beginner, have your image follow the dimension of the banner or footer on the Base Theme.

    All other tweaking or changes on the CSS, let the post Your Page and CSS Code be your guide.

6. Test and Preview your CSS by installing it on your Multiply Site. Make sure you backup your old CSS before you click Preview or Save.

7. Once satisfied, save the CSS and let it be your basis for your next theme. Enjoy tweaking, more themes to come and we expect to see it here in www.multiplythemes.com!

Entry Filed under: simplyJACY,Tutorials

207 Comments Add your own

  • 1. nicky  |  June 9th, 2008 at 4:31 am

    pano poh malalaman yung size ng banner ?? pm nio poh skin .. tnx!

  • 2. lyca  |  June 9th, 2008 at 5:36 am

    pano makuha ung url?

  • 3. simplyjacy  |  June 9th, 2008 at 9:28 am

    hello nicky!
    to know the size of the banner, you can see it in the CSS code of our base theme. you will find the width under div.owner_nav. the height can usually be up to you. the navigation menus will have to be adjusted though.

  • 4. simplyjacy  |  June 9th, 2008 at 9:32 am

    hi lyca!
    the URL of our image is provided below the image by most image-hosting software like photobucket. but in most site, there is another way in getting it.

    if you’re using Internet Explorer, just right click on the image, click on Properties, then copy the Address (URL) on that small window that pops up. Be careful coz some URLs may be too long and you might need to scroll down to highlight it all.

    if you’re using Firefox, simply right click on the image and click on Copy Image Location.

  • 5. liezl  |  June 10th, 2008 at 11:15 pm

    hello! the tutorial was really helpful but i can ask one more thing. i’ve been trying to put my image as background of the body. but i don’t know the css command to have it stretch and fixed. can you please help me? thanks.

  • 6. simplyjacy  |  June 11th, 2008 at 9:05 pm

    hello liezl!
    to put your own background image in the body, simply paste the URL of your image on the bold part of the code below:

    body {
    background: url(“URLofImage“) fixed;}

    on the code, i have added the word fixed to have the image on a fix position. if you want it to scroll, just delete the word fix.

  • 7. Lea Lim  |  June 16th, 2008 at 11:06 am

    hi! can you help me with the theme im doing? I tried the things you mentioned in this post. I inserted my images in the css but when i preview it, its still the base theme that comes out.
    thanks

  • 8. simplyjacy  |  June 17th, 2008 at 2:22 pm

    hello Lea!

    i checked on your site and realize that you have not customize the current Base Theme. which part of the tutorial are you confuse with? Basic Steps:
    ->Copy the Base Theme CSS (in your case Avalck)
    -> Copy and paste the URL of your image and insert it at the right part of the CSS.

  • 9. reiko  |  June 17th, 2008 at 2:52 pm

    are the codes of the base themes updated? read somewhere that some old themes are having problems because multiply updated the default themes.

    TnX.

  • 10. simplyjacy  |  June 17th, 2008 at 3:31 pm

    i believe they are up to date. but i will have to double check it for sure. btw, i saw your site and it looks really great. good job!

  • 11. reiko  |  June 18th, 2008 at 12:53 am

    tnx for the feedback! :) i love your themes too… keep making great themes. :)

  • 12. reiko  |  June 18th, 2008 at 3:48 am

    mind teaching me how to change the default icons? tnx. ^__^

  • 13. simplyjacy  |  June 18th, 2008 at 3:14 pm

    hey sweetie! thanks for the feedback. we hope to see your themes here in http://www.Multiplytweaks.com.

    regarding the changing of default icons, i’m going to make a tutorial of that okay?

  • 14. reiko  |  June 19th, 2008 at 1:57 am

    i’d gladly post the themes here.. :) and thank you for the tut ^__^

  • 15. simplyjacy  |  June 19th, 2008 at 10:04 am

    thanks sweetie! let me know if you want to contribute some tuts or your themes. we’d be glad to showcase them here.

    for now, we are working on having a different layout that would be easier for users to browse through themes.

  • 16. betina  |  June 20th, 2008 at 8:38 am

    hey! how can you add textarea in your posts?

  • 17. ran  |  June 29th, 2008 at 5:43 am

    How can I change my layout?I tried to click the customize my site but’s its not working.please do help me.thanks

  • 18. niKa  |  July 4th, 2008 at 3:57 pm

    how do i remove the blue parts on both sides of my banner? how do i make it transparent?

  • 19. simplyjacy  |  July 8th, 2008 at 7:04 pm

    nika, can you give me a link to your multiply account? that way, i will know what you’re talking about.

  • 20. Billyboi  |  July 13th, 2008 at 5:57 am

    hi, I just wanna know some more information on how to edit existing theme from this site. I have been trying to replace the urls in the css codes but they’re not appearing when i preview them.

  • 21. nosmik  |  July 18th, 2008 at 8:07 am

    hi there people! its good to be here! so many users interactions…i believe this is a friendly site…i’m just new in this multiply site and i find it good with a bit of problems…well,hope someone cares for a warm welcome…give love!

  • 22. simplyjacy  |  July 21st, 2008 at 3:10 pm

    welcome to multiplytweaks.com nosmik! do you think it’s best if we will have a forum around here? if everyone would like it, we can have it put up.

  • 23. simplyjacy  |  July 21st, 2008 at 3:13 pm

    Billyboi,

    remember that these themes are for free and if you plan to make changes to the CSS, you ask the owner if not give credits to them. unless you’re using the CSS of the base themes, then you need not ask permission.

    as for your problem, you must’ve missed a single character which is essential like semicolon or the colon. i checked on your site and i’ve seen that you are able to change the header image. that’s a good start!

  • 24. lovelyn  |  July 22nd, 2008 at 9:57 pm

    the tutorial is really helpful.. it’s just that i don’t know where and how will i put it in my profile

  • 25. simplyjacy  |  July 24th, 2008 at 7:16 pm

    once you have your own CSS, you can install it in your profile by clicking on Customize My Profile and there will be a yellow tab above that will appear. Click on Custom CSS and paste your CSS.

  • 26. ayen  |  July 26th, 2008 at 12:28 pm

    hi there! your tutorials are of great help! I just finished my first personal theme. yipee! thanks a lot and keep it up!

    I think creating a forum is a good idea to sort out the topics better and to have more interaction among the users.

    Also, may I link your site?

  • 27. simplyjacy  |  July 28th, 2008 at 3:13 pm

    hello Ayen!

    we are looking into improving this site better. eventually, we will make a forum.

    btw, you really did a good job on making your own theme. is it your first time? i’m really impressed.

    we would love it if you link our site. thanks a lot!

  • 28. ayen  |  July 29th, 2008 at 1:58 am

    thank you!

    yup. it’s my first time to customize my multiply theme but i already did some web layouting “stints” before.

    i’ve searched for tutorials all over the internet and i have to say that you tutorials were the easiest to follow.

    more power to you guys!

  • 29. lychezarr  |  July 30th, 2008 at 3:42 am

    This info help me very much. 10x for this.

  • 30. AndreaNicole Remonde  |  August 2nd, 2008 at 6:27 am

    hi! thanks for posting this one! :) i’ll work on mine as soon as i can. hahaha

  • 31. simplyjacy  |  August 4th, 2008 at 3:10 pm

    it is wonderful to know that we are able to help you in making your first theme.

    should there be any more concerns, let us know and we’ll be glad to help you out!

  • 32. marga  |  August 5th, 2008 at 8:25 am

    hi… I placed some .png pics in my menu bars… to be able to get the proper texts I want, what do i add so that the .png does not click to the pics where I’m calling up the texts? (disabling the hover hand )…

  • 33. simplyjacy  |  August 5th, 2008 at 12:20 pm

    hello marga!
    first of all, i would like to congratulate you with the beautiful and clean theme you made. good job!

    to answer your question, why don’t you use this html code to call for the image without redirecting you to the particular image:
    <img src=”urlofimage”>

    the above html code is not clickable. but if you want your viewers to click it and be directed to the specific place like blog for example, you can use the hyperlinking html code which is:
    <a href=”urloftheblogpage”><img src=”urloftheblogimage”></a>

    should you have any more questions just leave us a message here.

  • 34. nana  |  August 8th, 2008 at 11:08 am

    uhm…only half of the banner is showing…o.o;
    How do I make the whole banner show? and the footer is not in the middle? the width of the footer is…770 so is the banner…

  • 35. simplyjacy  |  August 8th, 2008 at 6:40 pm

    hello nana! what’s the height of your banner? take note of it and adjust the height part of this code:

    div.owner_nav.

    can you give me the link to your site? that way i will know what to do.

  • 36. nana  |  August 8th, 2008 at 7:47 pm

    oh and the height of the banner is 600 px.
    How big exactly do I make it?

  • 37. simplyjacy  |  August 9th, 2008 at 1:04 am

    hello nana! have the height exactly 600px as well.

  • 38. simplyjacy  |  August 9th, 2008 at 1:31 am

    hello nana!

    when i checked the page, I have actually seen the entire header. but still i have decided to adjust the height just to avoid future errors.

    here is the CSS that you have made which i made a few corrections which are explained below:

    i also tweaked the position of the Menu Bar by adding the element: margin-top: -185px; at the div#subnavc part of the CSS. how did i achieve that value of margin? I just did it by trial and error. first i tried to put a value and see where that value places the menu. and I arrived into that value which makes the menu sits on the top pink bar of your header.

    I have also added the margin-top: -100px; at the div#page_start to get rid of the big white gap between the header and the page. i arrived with the value of -100px by trial and error again.

    i have decided to hide the name of the Site since it is overlapping the header. if you want to restore the Site title, you can simply go to the h1#page_owner_title part of the CSS and delete the visibility: hidden;.

    the footer seemed to be in the right place. only that it doesn’t seem to be of the same length and seemed not part of the entire page. so i decided to add a border by putting a value of 10px solid #fff; at the border part of the div#ownedfooter. i have also adjusted the size of the footer to make sure it fits the image.

    let me know if you have copied the CSS and have it in safe keeping so I can remove it from the testing site. good luck!

  • 39. nana  |  August 9th, 2008 at 4:17 am

    Hi :)
    Thanks so much!!

    Yes, I’ve copied the css code but there’s still a prob with the footer?:(
    sorry….

  • 40. lyza  |  August 9th, 2008 at 9:13 am

    please help, i want to change the font of my text in my page… please help me change the font of both the title and the body…

    ie. welcome to my world -(title)
    When times seems tough… just …. -(body)

    kind regards,
    -lyza

  • 41. simplyjacy  |  August 9th, 2008 at 2:27 pm

    hello nana!

    i’m sorry but i actually forgot a very important thing. the reason why the footer is messed up in your site is because you are using the different base theme (Andros) from the Custom CSS that you are having.

    to fix it, go to Customize My Site, click on Choose a Theme and then select the AVLACK. then go to your custom CSS and click save on it.

    it should all be fine now.

  • 42. simplyjacy  |  August 9th, 2008 at 2:43 pm

    hello lyza!

    thanks for dropping by. do you have a particular font style in mind? just to remind you that if other people’s computer doesn’t have that particular font you have chosen, that part will appear to be the basic fonts like arial or something.

    so to change the font of the title (welcome to my world), look for this part of the CSS:
    .itemboxsub and change the value of the font-family.

    for the body, go to .itembox and add this string font-family: century gothic; in it. if you don’t like the century gothic font, change it to your preference.

    in the future, use this tutorial Your Page and CSS to know what part of the CSS would correspond to the particular part of your page.

  • 43. nana  |  August 9th, 2008 at 11:53 pm

    ooohh… Thanks so much!!!! I really appreciate your help :)

  • 44. simplyjacy  |  August 10th, 2008 at 12:24 am

    you’re welcome! we would appreciate it if you would link us or blog about us. thank you!

  • 45. hachiko  |  August 11th, 2008 at 10:08 am

    i posted this but my banner and background wont show up?

    http://multiply.com/style/custom/skyline/23.css

  • 46. simplyjacy  |  August 11th, 2008 at 11:09 pm

    hello hachiko!

    thank you for coming our site to get help on designing your own theme. we have fixed your problem and we would like you to take note of how we did it so you can do it yourself.
    here is your personalize CSS:
    Hachico’s Personalize Theme

    You can check out the look of it here: Hachico on the Testing Site

    the first is the body of your page. the reason why the image did not appear is because you pasted the URL of your own image in the wrong place. if you noticed on the corrected CSS above, we pasted the URL of your image in the background: url(“urlofimage”) in the body tag.
    we also removed the no-repeat on the skyline original theme so that your image will occupy the entire page.

    you have the same issue on your banner. paste it in the background: url(“urlofimage”> part in the div.owner_nav. we also added the no-repeat and center beside it so that it will avoid repeating the banner. and we have also adjusted the height of the div.owner_nav similar to the banner image.

    we also moved the menu bar down by adding this string: margin-top: 340px; on the div#subnavc part of your CSS.

    let me know if it works for you. that way we can take your first personalize theme down from our testing site.

  • 47. ramedogfx  |  August 12th, 2008 at 10:37 am

    grrr my banner its been cut-off! I’ve followed the instruction on how to install and as a matter of fact, my banner size is the same size as the theme…I dunno..dunno where to edit..anyone please help??My Base theme is Mykonos. My banner –> http://i36.tinypic.com/20qnhq8.jpg Anyone please help… Pm me on my multiply page or email me. [email protected]

    I really appreciate your big help.

  • 48. simplyjacy  |  August 12th, 2008 at 11:26 am

    hello ram!
    if you check on your CSS, the part of it that is labeled as /*BANNER STARTS HERE*/ is actually not the banner. it is more of the body of the page. i have seen you had the height similar to your image. but that’s not where you want it to be, is it?

    so go ahead and remove the URL of your image in that part. and look for this part of your CSS which controls the banner: div.owner_nav
    you might see there are two heights, there, get rid of one and make the height value similar to the height of your image. don’t forget the semicolon ( ; ) after the value.

    then remove this: background-position: 0 -100px;
    and click on save. you should have your banner up!

    in the future, refer to this Tutorial to know what CSS corresponds to the part of your page:
    Your Page and CSS

  • 49. amica  |  August 14th, 2008 at 7:17 pm

    hey. =] how come the background & my banner doesn’t appear. I’ve benn working on it a few weeks na. =(( pls. help me.

  • 50. question-er  |  August 16th, 2008 at 2:15 am

    how about the railstart?

  • 51. simplyjacy  |  August 18th, 2008 at 12:40 am

    hey amica!

    your page looks great even if i haven’t seen the background yet. good job!

    the reason why you can’t see your background is because you have 2 background url string in your div.owner_nav.

    go ahead and delete the entire string of background url which is immediately right after the code div.owner_nav up to the semi-colon and you will see your banner already.

  • 52. simplyjacy  |  August 18th, 2008 at 12:40 am

    question-er,

    what about the railstart? what do you want to know about it?

  • 53. reiko  |  August 23rd, 2008 at 6:31 am

    hey there! been a long time since i visited your site.. was busy with projects… was wondering if you could give me some tips on how to make my designs compatible with both IE and firefox.

    thanks jacy!

  • 54. simplyjacy  |  August 24th, 2008 at 12:33 am

    hello reiko!
    it’s nice to see you again girl! to be honest with you, making a theme that is compatible for both IE and Firefox is a challenge.
    the closest we can get there is to preview them ourselves in both browsers and see if they look good.

    a very safe way is to make themes from scratch (editing the Base theme). usually it works on both.

  • 55. lee  |  August 28th, 2008 at 11:19 pm

    hi! about the welcome message, how can I make it double space? Thanks! :)

  • 56. Mark  |  August 30th, 2008 at 12:22 am

    hi.. how can i change the border of my albums?

  • 57. SoFia ♥  |  September 4th, 2008 at 5:55 am

    Hi!:)

    is it supposed to be like this?:

    .railend {URL of Image}
    height: 2px;
    width: 159px;
    background: none;
    background-color: #8da217;
    }

    ——————————————–

    And also to the others? Thanks.

  • 58. shannoelle  |  September 11th, 2008 at 7:27 am

    hi can somebody work a theme for my online shop? please pm me..http:shannoellestore.multiply.com thanks

  • 59. topaz  |  September 13th, 2008 at 1:37 am

    hello. i chose to make a retro-based theme and i was wondering why the background of my new customized theme turned out to be pure white when it was supposed to be pink. i’m really having a hard time!!! help me. hahaha. please email me! thank you so much.

  • 60. topaz  |  September 13th, 2008 at 1:38 am

    *follow-up*
    also that the banner i chose didn’t appear, it still was the original banner of the Retro theme. >>> EMAIL ME.

  • 61. simplyjacy  |  September 13th, 2008 at 10:56 am

    give us a link to your site so we can check on it and see what’s causing the problem.

  • 62. ruffa  |  September 13th, 2008 at 9:34 pm

    uhmm .. i’m new to multiply kc ..
    i had a problem sa HEiGHT and WEiGHT ng mga boxes .. so .. ndi ko ma.perfect ang site co )):

    please help .. i want to customize everting in my site .. =(( can i ask help from you ? :( (
    PM me .. :D tnx so much .. :)

  • 63. ruffa  |  September 15th, 2008 at 7:40 am

    hmm .. hello .. :D
    how will i customized the resize thing ?? :D

  • 64. telly  |  September 17th, 2008 at 1:39 am

    this is such a great site for people who are starting and for those like me who know how,but do it the hard way. thank you so much!

  • 65. Yette  |  September 20th, 2008 at 2:03 am

    Hi, I was just wondering, how can I change the measurement between the header/menu bar & the main entries itself.

    This is my problem. You see how far the menu bar is from the main entries? I hope you could help me with that because I’m seriously having a migraine trying to figure this out.

    Thanks very much in advance :)

  • 66. ellen  |  September 26th, 2008 at 3:34 am

    thanks a bunch for this tutorial!!!
    really helpful :)

  • 67. Jenny  |  September 27th, 2008 at 4:48 am

    THANKS A LOT!:) :D :]

  • 68. nono  |  October 17th, 2008 at 3:17 am

    pano mo po nakuha ung CSS ng mga base theme? tnx a lot!

  • 69. nono  |  October 17th, 2008 at 3:24 am

    ok na po, nakuha ko na. pwede pala puntahan ung url ng CSS. tyvm!

  • 70. thoiang  |  October 17th, 2008 at 6:41 am

    ..uhmm panu poh matatanggal ung blue thing sa banner?

  • 71. peppercutter  |  October 19th, 2008 at 9:44 am

    I’m trying to put a banner through the div.owner_nav but it won’t work. Instead, the two layouts crash right through the header.

  • 72. simplyjacy  |  October 19th, 2008 at 11:46 pm

    hello everyone!
    sorry for the late reply. if you are experiencing problems with customizing your theme and is asking for help here, please be more specific and don’t forget to include the link of the page that you are working on. that way we can check what causes the problem.

  • 73. Daniel N  |  October 20th, 2008 at 7:53 am

    I need the code for the size of the banner.
    After this:
    body {
    background: url(”URLofImage“) fixed;}

  • 74. Ryu  |  October 26th, 2008 at 12:36 am

    I have seen some Avlack-based themes that include a background for the sidebar. What’s its size, and its right margin?

  • 75. tin  |  October 27th, 2008 at 1:05 pm

    How can i change the size of the boxes (about me, blog, phtos, etc.) so I can make them in columns. I mean, example, in the right of your ‘about me’ is the blog.

  • 76. joyce  |  October 29th, 2008 at 7:24 am

    hi! i really need ur help.. the body of my multiply account disappeared.. pls help me..

  • 77. simplyjacy  |  October 30th, 2008 at 12:21 am

    hello joyce!

    i visited your site today but it looks like you have it back. should there be anything that you need help from, i’ll try to get back to you as soon as possible.

  • 78. simplyjacy  |  October 30th, 2008 at 12:23 am

    hello Ryu!

    for avlack, the width of the railbody is 129px.

  • 79. simplyjacy  |  October 30th, 2008 at 12:25 am

    hi Daniel!

    as you may know, that code that you have quoted is not for the banner, it is for the whole site’s background. is that what you needed?

  • 80. simplyjacy  |  October 30th, 2008 at 12:26 am

    tried to access your site so i can see what went wrong but it turned out that the link you have provided is not available or you have deleted your multiply account.

  • 81. a  |  November 1st, 2008 at 2:30 pm

    hi :) this is a very helpful tutorial, but i’m still having a hard time with the theme i’m trying to make. i copied the dimensions/pixels included in the theme base (i used mykonos) so i could make my banner and footer in the same size. when i tried it out, both did not fit. :( my banner was cut on the top. my footer was too short. i don’t get it. lol. maybe you could help me. thanks! :)

  • 82. simplyjacy  |  November 1st, 2008 at 11:26 pm

    can you give me the link to your site so i can see what went wrong and how to fix it?

  • 83. tonette  |  November 6th, 2008 at 10:20 am

    hindi ko po mailagay yung header ko sa base theme. :( pano yun?

  • 84. simplyjacy  |  November 6th, 2008 at 1:45 pm

    why not?

    did you put it at the div.owner_nav?

  • 85. reiko  |  November 7th, 2008 at 8:17 am

    hi jaycY! reiko here.. just want to say thanks for this awesome site again… it’s the most helpful website i’ve been to.

    Made me understand what i was doing.. XD hehehe.. :P

    anyway just want to tell you that i finished another mulitply theme for my AUDIction.. hehehe… and i might share some of my themes to your site soon. :)

    here’s the site… http://myaudiction.mulitply.com.

    oh and btw, can i add you to my Y! messenger? i’m new to all these so i still have questions that maybe you could help me with…

    sorry sa nobela.. hahaha! thanks again!

  • 86. candy  |  November 9th, 2008 at 10:52 am

    hi! i would just like to ask how to move or lower the div#subnav part? it’s covering my banner and i don’t know how to move it… hope someone can help me. thans!

  • 87. reiko  |  November 9th, 2008 at 11:53 am

    would anyone know how to change the textarea? XD thanks.

  • 88. simplyjacy  |  November 9th, 2008 at 5:50 pm

    if you want to tweak the textarea, this is the code:
    textarea {
    color: #000;
    background: url(“urlofimage”);
    background-repeat: no-repeat;
    background-position: right bottom;
    }

  • 89. simplyjacy  |  November 9th, 2008 at 5:53 pm

    it would be best if you include the url to the page that you are working on so we can have an idea where to fix in specifics.

    however in general, look for this code in your CSS:
    div#subnavc

    add or look for the string: margin-top: 100px; inside code. change the value of the margine-top string to move your navigation bar. high value brings it down, low value brings it up.

  • 90. simplyjacy  |  November 9th, 2008 at 5:56 pm

    hello reiko!

    my Y! messenger is same as my name here.

    which is very obvious since my website is named after it too! http://www.simplyjacy.com

  • 91. tonette  |  November 10th, 2008 at 9:50 am

    opo. :( kaso ayaw talaga. ginawa ko din yung sinabi niyo na kung san mahahanap yung url pero ayaw talaga.

  • 92. simplyjacy  |  November 10th, 2008 at 11:30 pm

    can you give me the url of your page. that way i will what went wrong?

  • 93. tonette  |  November 11th, 2008 at 10:05 am

    sige po. http://okrangbulok.multiply.com/

  • 94. simplyjacy  |  November 12th, 2008 at 1:20 am

    hi tonette!

    blue slate theme is not the easiest base theme to tweak. i usually advise learning designers to play with shadowbox or avlack instead.

    with regards to your image no appearing, it is because you need to insert it with the “background” attribute. so this should be inserted on the div.owner_nav string instead of just the url of your banner.

    background: url(“http://i422.photobucket.com/albums/pp302/okrangbulok/header09.jpg?t=1226413230
    “);
    height: 200px;

  • 95. ika  |  November 12th, 2008 at 6:36 am

    hey… could you help me…. i have been trying so many times to make my own layout but i have been encountering too many difficulties…. one of my problems include: my background image not showing and such…. please and thank you…..

  • 96. tonette  |  November 12th, 2008 at 9:12 am

    thank you po. :) magtatry na lang po ako sa ibang base theme.

  • 97. simplyjacy  |  November 12th, 2008 at 6:31 pm

    hello ika!

    i’m viewing your page right now and i can see the background image. you probably fixed this one already.

  • 98. simplyjacy  |  November 12th, 2008 at 6:31 pm

    let me know if you encounter any problems.

  • 99. ika  |  November 13th, 2008 at 5:44 am

    hey… yeah… i already got it fixed.thank you… but i have a problem again….. I don’t know how to make a banner… :( i mean i have tried looking at your tutorials on how to make a banner but sadly, i still couldn’t make it coz i have trouble understanding the tools that i have to use in photoshop….. help again….. :)

  • 100. ika  |  November 13th, 2008 at 6:24 am

    hey there! i already got my banner fixed…. haha :) ) but. if you look at my profile, the color of the page is just white… i would like it to be the same as with my background…. help again…. thank you!!!!

  • 101. tonette  |  November 13th, 2008 at 10:10 am

    :( natry ko na po sa avlack pero wala pa ring nangyayari. napupunta tuloy yung header sa gilid pero hindi naman yun yung header na ginawa ko.

  • 102. xattie  |  November 14th, 2008 at 2:13 am

    pno kung wla akong cs2 or cs3?
    pki-pm nlng po. :)

  • 103. tonette  |  November 14th, 2008 at 10:05 am

    mejo kita na po yung header ko kaso po may nakaharang. pano ko po yun tatanggalin?

  • 104. simplyjacy  |  November 14th, 2008 at 2:55 pm

    you can use other imaging software like Gimp or others. you just have to use your creativity to come up with the image.

  • 105. simplyjacy  |  November 14th, 2008 at 2:57 pm

    there are a lot of photoshop tutorials that will teach you how to use those tools. i will try to look for them and post it under the Tutorials section. in the mean time search it out yourself.

  • 106. simplyjacy  |  November 14th, 2008 at 3:01 pm

    hi ika!

    you might want to change the height on the div.owner_nav of your css to 250px; since your banner’s height is 250 that way it won’t look cut off.

    as for the body color, you can change it at this part of the css:

    td#maincontent { padding: 0 25px 0 0;
    margin: 0;
    background-color: #fff; /*change the #fff to your color’s hex value*/
    }

    if you want to use an image to be the background, just add this string of code with your image’s url inside the above code:

    background: url(“urlofyourimage”);

    good luck!

  • 107. simplyjacy  |  November 14th, 2008 at 3:12 pm

    hi tonette!

    look for this code in your CSS: h1#page_owner_title and delete the entire sting (up to this }) and replace it with the code below:

    h1#page_owner_title {
    padding: 20px;
    background-color: transparent;
    color: #fff;
    border: none;
    display: none;
    }

    what i basically did was delete all the background image and color tag on it leaving only the background-color: transparent; code.

    next is look for this string: div#subnavc and erase the url in the background tag.
    and then add this string within the div#subnavc:

    magin-top: 180px;

    so your div#subnav string should look like this:

    div#subnavc {
    background: url() no-repeat bottom;
    background-color: #456;
    width: auto;
    margin-top: 180px;
    }

  • 108. nikita  |  November 14th, 2008 at 10:55 pm

    Ano po size ng avlack header natatakpan po kasi yung mga nav link? pwede po bang paliitin ‘yung font ng site title?

  • 109. nikita  |  November 14th, 2008 at 11:42 pm

    tanong pa po pasensya na po wala po kasi alam sa pag-edit ng multiply. pano po papalitan ‘yung font color avlack po yung theme na gamit ko. gusto ko palitan yung green and gray na font color.

  • 110. nikita  |  November 14th, 2008 at 11:44 pm

    pano po rin pala i-aadjust yung size ng header para po hindi matakpan ‘yung mga nav links? salamat ng marami!

  • 111. tonette  |  November 15th, 2008 at 2:58 am

    tenkyu po. nagawa ko na. :)

  • 112. tonette  |  November 15th, 2008 at 10:22 am

    question po. pano po mejo ibaba yung navigation bar? saka balak ko po kasi gawing black yung kulay niya. thanks. :)

  • 113. simplyjacy  |  November 16th, 2008 at 3:48 am

    what’s the url to your site that you’re working with?

    typically, the dimensions of the avlack header is 760×200. it is best if you keep this width. but you can be free to make your image height bigger. all you have to do is change the height on your CSS.

    you can also change the font on your site title by looking at this string of code in your CSS:
    h1#page_owner_title
    you can add this within the string:
    font-family: times new roman;

  • 114. simplyjacy  |  November 16th, 2008 at 3:50 am

    nikita, you might want to check this tutorial so you will know which part of the CSS controls the particular part of your page.

    Your Page and CSS

    that should give answers to your questions.

  • 115. simplyjacy  |  November 16th, 2008 at 3:57 am

    increase the value of the magin-top in your div#subnavc string.

    change the value of the background-color: #345; to #000

    then go to your div#subnac and delete all the background-color and it’s values leaving only 1. with the remaining background-color, change the value to #000.

    tonette, for future reference, check this tutorial to know which part of the CSS you need to work on with regards to your page:
    Your Page and CSS

  • 116. tonette  |  November 16th, 2008 at 5:26 am

    salamat po. :)

  • 117. Penny  |  November 22nd, 2008 at 12:33 pm

    Hi!

    This site has been very helpful to a newbie like me. I’ve followed all the instructions and so far, I am satisfied.

    Except for one thing: How come the pictures/albums I have uploaded on my homepage is not visible? In place of the pics was just the word “thumbnails”.

    Can you help, pls? Tnx! ^_^

  • 118. simplyjacy  |  November 22nd, 2008 at 12:49 pm

    please include the URL of your site so we can see what went wrong.

  • 119. Dessa  |  November 23rd, 2008 at 4:04 am

    hi. how do i put a background for the textboxes in my guestbook?

  • 120. angelie  |  November 29th, 2008 at 10:36 am

    my rail body is out of bound. :( how can i fix it?

  • 121. simplyjacy  |  November 29th, 2008 at 2:52 pm

    i checked on your site and it looks like the railbody is on its place.
    in the future, this tutorial might come in handy for you:
    Your Page and CSS

  • 122. angelie  |  November 29th, 2008 at 10:21 pm

    i have fixed it na! :) but i cant see my enter button and the viewing profile box.. :(

  • 123. slyjester  |  December 1st, 2008 at 5:30 am

    quick question here on the body part
    what is the size of it ?
    btw i am tweaking the “Outburst” theme

  • 124. faithlily  |  December 2nd, 2008 at 4:38 am

    hi, could you pls help me fix my footer? i didn’t own the theme, i just copy and paste it from shar, but the theme doesn’t look right on my site so i made some adjustments. so far my only problem now is the footer. i cant make it aligned with the body. thanks:)

  • 125. clever  |  December 3rd, 2008 at 2:33 pm

    Hi, thanks for all the tutorials. They’ve really been of great help.

    I’m trying to adjust the font size of my theme, but somehow can’t get them to change to the size I want.

    I’m hoping you can help tell me the difference between PT and PX in the font-size? And also, what should I edit in my CSS to change the font of my page’s ABOUT ME? It’s so tiny and I can’t seem to edit it right.

    Please help. Thanks in advance!

  • 126. simplyjacy  |  December 4th, 2008 at 11:45 pm

    which enter button were you talking abotu? was it the guestbook?

  • 127. simplyjacy  |  December 4th, 2008 at 11:47 pm

    there is actually no specific size for the body part as it automatically adjusts to the height of the elements like images and texts you put into it.

  • 128. simplyjacy  |  December 4th, 2008 at 11:59 pm

    hi faith!

    look for the footer code and replace the entire thing with this code:

    div#ownedfooter {
    margin: 0;
    margin-left: -1px;
    width: 793px;
    height: 170px;
    padding: 0px 0px 0 0px;
    line-height: 170px;
    border: none;
    color: #FF4A79;
    text-align: center;
    font-size: 10px;
    background: url(http://img352.imageshack.us/img352/4442/inlovefooterru9zc8.gif) no-repeat bottom;
    }

    that code should align the footer with the rest of the body.

  • 129. simplyjacy  |  December 5th, 2008 at 12:14 am

    first of all, i would like to congratulate you with your design. it really looks good.

    with regards to the difference between PT nd PX, PT stands for point. for example 72 pt equals one inch = 2,54 cm. PX stands for pixels which is based on screen resolution. if you define your font-size in all online documents in pt rather than px then you have a steady / equal font-size on any monitor of any resolution and thus a steady reading comfort independent of monitor resolution used by readers/surfers.

    with regards to the small fonts of your page, that was due to the tweaking that you made. to have control of those tiny text, you can try to add font-size: 12px; value inside the .itembox string.

  • 130. faithlily  |  December 5th, 2008 at 10:16 am

    yey! the footer’s aligned now! a million thanks! :)

  • 131. simplyjacy  |  December 5th, 2008 at 2:14 pm

    that sounds good! do come back for more themes and tutorials.

  • 132. clever  |  December 6th, 2008 at 2:01 am

    Thank you so much. I was able to adjust it!

  • 133. clever  |  December 6th, 2008 at 4:16 am

    Hi Jacy, thank you for your assistance, but I still encountered some misalignments. Can you kindly visit my page and see how I can change the links in my photo albums? I can’t even see the links like EDIT/DELETE, ADD MORE PHOTOS etc. I think I need to change its color, but I can’t find it in the css code.

    How do I also change the font size of the links on my railbody? I also hope you can check why my layout is suddenly misaligned.

    Thanks so very much in advance!

  • 134. sheh  |  December 6th, 2008 at 1:40 pm

    hi panu gumawa ng theme with the background pic of ur choice,, tpos ang base theme is andros.. pls help thanks..=)

  • 135. sheh  |  December 6th, 2008 at 1:44 pm

    hi panu gumawa ng theme with the background pic of ur choice,, tpos ang base theme is andros.. pls help thanks..=) o kaya hindi andros pero plain lang.. parang like this site. http://harleneang.multiply.com/ simple lang.. thanks.=)

  • 136. simplyjacy  |  December 6th, 2008 at 1:50 pm

    hi sheh!
    did you not follow the step-by-step guide above? if you read it and follow each step, you should be able to figure it out.

  • 137. simplyjacy  |  December 6th, 2008 at 1:51 pm

    the website you have mentioned is using the Default base theme.

  • 138. simplyjacy  |  December 6th, 2008 at 2:27 pm

    If you check out Your Page and CSS Tutorial, you will find out that the part of your page that is not aligned is the .railbody. this way, you will know that you need to adjust it’s width and take away the padding. if you remove the entire padding string and decrease the width to 125px, that should align your entire page. (the value btw is obtained through trial and error)

    as for the EDIT/DELETE stuff, you can control it by looking for this code on your CSS

    a.mine, a.mine:link, a:visited.mine {
    /* color: #FFF; border: none; background-color: #FFF; margin: 0 2px 0 2px; */
    color: #000; border: none; background: none;
    }

    change the value of the color: #000; to your desired color-hex value.

    as for the opposite side that says: SHARE/PRINTS, REPLY, look for this code on your CSS:

    div.ritemactions a, div.ritemactions a:link, div.ritemactions a:visited {
    /* color: #FFF; border: none; background-color: #FFF; margin: 0 2px 0 2px; */
    color: #000; border: none; background: none;
    }

    change the value of the color: #000; to your desired color-hex value.

    and lastly to change the font size of the link on your railbody, look for this code on your CSS:

    /* links in the rail */
    .railbody a, .railbody a:link, .railbody a:visited {
    color:#000000;
    }

    before the end of the “}“, add this string of code to control the size of the font: font-size: 10px; or whatever value you prefer.

    your comment gives me a realization that there are indeed lots of tutorials that I need to put up. eventually, i should be able to to. thank you for your loyalty on http://www.Multiplytweaks.com and More Power!

  • 139. Izza  |  December 7th, 2008 at 1:59 am

    How can I change the font of the ‘Home.. Etc.’ with my retro theme?? :) Thanks in advance.

  • 140. simplyjacy  |  December 7th, 2008 at 2:00 am

    hi Izza! unfortunately, we have not found a way to change it.

  • 141. Jv  |  December 7th, 2008 at 2:49 am

    Hi! I’m madly looking for someone who can help me fix my multiply shop..
    I really want it personalized, thanks to this site for helping me make one, like in my site now!

    For now, I want something really customized..
    Will someone help me (PLEASE!) customize my entire site?
    Yung nav bars, or URL Icons, I can create they’re own design and links.. ^_^

    PLEASE! thankyou to this site! ^_^
    and to everyone that’s making things possible here in multiply.. ^_^

  • 142. simplyjacy  |  December 8th, 2008 at 1:24 am

    give us a link to your site so we can help you with whatever concerns you have.

  • 143. gc  |  December 11th, 2008 at 10:23 am

    hi! this site is really helpful, i successfully managed to change the appearance of my site specifically my banner, my problem is, i cant seem to apply a specific picture to be my background. Its a product of mine and i wanted it to be seen on the site as its background, tiled in style.
    I already did the instructions on how to apply it (knowing it will work because i did it correctily in my banner) but i cant seem to make it work…can someone help?! i badly need it because its my online shop. THank u very much in advance!

  • 144. clever  |  December 15th, 2008 at 2:07 am

    Hi Jacy, I really appreciate your assistance.

    Do you also know how I can change the title of my page? In my case, it’s the title that appears on the blue bar, saying “CLEVER CONCEPTS?”

  • 145. simplyjacy  |  December 16th, 2008 at 1:54 am

    hi there! i think you have figured this one already since i don’t see any blue bar that says Clever Concepts. if not, where can i find it?

  • 146. Confuzed  |  December 21st, 2008 at 12:57 am

    i can’t change the color of the home utton and the other links everytime i change it comes out white how do i change it?

  • 147. simplyjacy  |  December 21st, 2008 at 2:53 am

    can you give us a link to your website. there must be something missing from the code like the important semi-colon.

    if you give us a link to your site, we would be able to find which part went wrong.

  • 148. simplyjacy  |  December 21st, 2008 at 2:55 am

    this tutorial might be helpful for you: Your Page and CSS Code

    that part is typically controlled under the strings: a.topt and a.toptsel

    if you are still not able to fix it this way, give us a link to your site so we can see what went wrong.

  • 149. Confuzed  |  December 21st, 2008 at 1:24 pm

    Can u pls give me an example I don’t get it….

  • 150. Confuzed  |  December 21st, 2008 at 1:30 pm

    No need to! I get it tnx so much!!!

  • 151. Confuzed  |  December 21st, 2008 at 1:41 pm

    can I ask? what’s a padding?

  • 152. vinzz  |  December 22nd, 2008 at 7:40 am

    i used your guide and i came up with this.. http://vinchi14.multiply.com/ all my problem is the rail par. i can only edit some part but not all..

  • 153. cheri  |  December 23rd, 2008 at 4:22 pm

    i follow all the given sizes but the banner and the footer has repititions?

  • 154. mikki  |  December 24th, 2008 at 12:36 am

    i cant get it can you pls give me an example

  • 155. RhiallA  |  December 24th, 2008 at 1:45 am

    umm..d ko po maintindihan..ang hirap naman po..pano po ba makakuha ng base theme?

  • 156. cheri  |  December 24th, 2008 at 4:45 am

    the size of my banner is: H-500px X W-780px. inside that size nagiging 2 desyns.

  • 157. sunny  |  December 28th, 2008 at 8:57 pm

    HI… I’m just newbie in multiply, but I really want to learn to customize, but I don’t know where to start…

    I want to change the owner title… i want to put picture there… I want to change the font size, font color and I want to make it in Papyrus style….. BUT I DON”T KNOW HOW???

  • 158. gillibean  |  January 1st, 2009 at 11:51 am

    hi! very helpful tutorial :)

    i’m having trouble with my banner. it’s all messed up and the text on my photo coincides with the title. i’m not sure which measurements to tweak. i need your help. :(

  • 159. gillibean  |  January 1st, 2009 at 12:23 pm

    hi, this is the link to the layout that i tried to edit. kindly disregard the previous link/site. i created a new account so that my actual site won’t look messed up.

    thanks.

  • 160. gillibean  |  January 1st, 2009 at 12:27 pm

    hi again.

    sorry, i’m not sure what happened with my previous comment. anyway, if you’ll take a look at my site, the banner i want to put is split into two, and i don’t know why :( i also want to move the header with the links (home, blog, photos, etc.) a bit lower since it cuts through my picture. how do i do that? i tried to tweak the numbers on my own but i just can’t seem to get it. :(

    thanks in advance for your help.

  • 161. Saniya  |  January 2nd, 2009 at 2:45 am

    Excellent Post, thanx for sharing the same.. Will keep on reading the post :D

    Stumbled your post .. cheers

  • 162. someone.  |  January 2nd, 2009 at 3:55 pm

    do i have to copy paste the css for the banner , background and stuff to CUSTOM CSS ?

  • 163. destinhaven  |  January 3rd, 2009 at 11:52 pm

    hi where can i insert the cursor code?

  • 164. :D  |  January 6th, 2009 at 8:33 am

    when i posted the url of the picture on the CSS, then i clicked preview it was still the same theme…help?

  • 165. admin  |  January 7th, 2009 at 5:11 pm

    I noticed that you have an Avlack base theme but using the MyKonos base theme codes. this has somehow created a slight problem. although it can be done, we need to take a closer look on each codes and compromise each other.

    my suggestion is to make your base theme as Mykonos and paste your CSS. i tried it and it looks better and it will be easier for you to control the other page elements.

  • 166. simplyjacy  |  January 7th, 2009 at 5:20 pm

    if the size of the image banner or footer is smaller than what is on the CSS, the image would repeat itself. my advise is to change the values of the height and width of those elements to match the size of your image.

    if you don’t want repetition you can also use this code: background-repeat: no-repeat;

  • 167. simplyjacy  |  January 7th, 2009 at 5:22 pm

    you can find the codes of the base themes here:
    Base themes and their CSS Codes

  • 168. simplyjacy  |  January 7th, 2009 at 5:24 pm

    your banner image might be smaller than what’s on your CSS. try to make them the same.

  • 169. simplyjacy  |  January 7th, 2009 at 5:45 pm

    the tutorial should guide you on what you want to do. the tutorial also links you to other tutorial that will give you an idea what part of the CSS you should control to obtain what you want for your site.

  • 170. simplyjacy  |  January 7th, 2009 at 5:54 pm

    are you referring to the theme that you have on your page now?

  • 171. simplyjacy  |  January 7th, 2009 at 6:05 pm

    what would you like to do? would you like to hide the Title so it will only show the text in your image? or would you like to move the title instead?
    to control that part of your page, look for this code: h1#page_owner_title
    to hide it, add this string inside it display: none;
    if you want to move it around add this code:
    position: absolute;
    right: 150px;
    <– play with the values until you reach your preference position

  • 172. simplyjacy  |  January 7th, 2009 at 6:16 pm

    if you noticed in your code, there are two div#owner_nav in it. so delete the first one so you can control that particular element of your page.
    to show your entire pictuer, remove one of the height and it’s values and replace the value of the other one to the height of your banner image. if you think it’s too much, adjust the value again. i used 300px and it looks fine.
    since your banner image is smaller than the alotted of 760px, you might want to center the image or adjust the height of the image to 760px;
    to center it, delete the value of the background-position to center.

    to move the menu bar lower, look for this code: div#subnavc and add this string: margin-top: 185px;

    check your CSS for code repetition. i have also noticed there are two subnav and subnavc in it.

  • 173. simplyjacy  |  January 7th, 2009 at 6:18 pm

    thanks for Stumbling this post. if you have any questions, just let us know.

  • 174. simplyjacy  |  January 7th, 2009 at 6:21 pm

    you have to paste the entire CSS of your theme which includes the body, banner, footer and other elements at the Custom CSS. that way you will see what you’ve been working on.

  • 175. simplyjacy  |  January 7th, 2009 at 6:24 pm

    you can insert it at the end of your CSS

  • 176. simplyjacy  |  January 7th, 2009 at 6:28 pm

    can you give me a link to the site that you’re working at. i want to see it so i can tell which part you missed.

  • 177. :D  |  January 8th, 2009 at 11:49 pm

    heres the link:
    http://s551.photobucket.com/albums/ii473/rome_424/?action=view&current=mushroom-1.jpg

  • 178. simplyjacy  |  January 9th, 2009 at 12:54 am

    i meant the url of your multiply site.
    anyway, look for this code on your CSS:
    div#owner_nav
    under that tag there should be this string: background: url("http://");
    replace the string with this: background: url("http://s551.photobucket.com/albums/ii473/rome_424/?action=view&current=mushroom-1.jpg");

  • 179. ingrid  |  January 9th, 2009 at 7:41 am

    i don’t get it.. where will we make our layouts?

  • 180. ingrid  |  January 9th, 2009 at 7:42 am

    or i mean what website?

  • 181. kriz  |  January 10th, 2009 at 1:23 am

    Your tutorial is very helpful. Thank you so much!

    I just have to ask something, for the CSS, I’ve been trying to put my image but it’s not changing anything.

    Example:

    div.owner_nav {
    border: black;
    margin: 0 auto;
    margin-top: 20px;
    height: 310px;
    height: 130px;
    width: 760px;
    border: 10px solid #fff;
    border-bottom: none;
    padding: 113px 0 0 0;
    background: url(http://i15.photobucket.com/albums/a390/kriz7/Snapshots/Untitled-1.jpg) -repeat top left;
    background-color: #fff;
    background-position: 0 -10px;
    }

    Hope you can help me. Thank you again.

  • 182. simplyjacy  |  January 10th, 2009 at 1:35 am

    are you working on it at your multiply page right now? try to paste that in your CSS coz when i checked your current layout now, that code you have attached here is not pasted on your CSS.

  • 183. ingrid  |  January 10th, 2009 at 10:34 pm

    what website will we do our layouts? and where can we get pics? in photobucket?

  • 184. ingrid  |  January 10th, 2009 at 10:40 pm

    and what do u mean by open notepad??

  • 185. :D  |  January 13th, 2009 at 6:26 am

    i can’t find div#owner_nav only div.owner_nav

  • 186. kriz  |  January 13th, 2009 at 6:12 pm

    Thank you for you reply and help.

    I’ve actually tried pasting the css code but it just misaligns my header

  • 187. adam  |  January 14th, 2009 at 10:38 pm

    gud day po,

    ask ko lang kung ok lang ba kung yung photo/background pix nya hindi cya naka-upload sa internet?

    ang gagamitin lang nya s yung local location sa pc mo..

    ok lang ba kung ganun?

  • 188. kriztin  |  January 19th, 2009 at 11:26 pm

    my God im going crazy about this i cant understand i need somebody help!! teach me the step by step about this!! plz somebody help me!!

    tnxz

  • 189. mel rose  |  January 20th, 2009 at 10:31 am

    how can i put my own cursor.?? tnx .!!

  • 190. mel rose  |  January 20th, 2009 at 10:47 am

    bkt gnun?? ayaw lmbas nung mga gnwa ku .. ahuhuhu help pls!!!

  • 191. dylan  |  January 26th, 2009 at 12:49 pm

    hi! simply jacky! i just read some of the problems that you solved. can you pls help me too. i’m having a hard time with my site. bacause the images at my site are too small. how can i bring them back to normal size? pls help me. thanks! this is my multiply acc. dylancruzer.multiply.com

  • 192. pat  |  September 27th, 2009 at 11:33 am

    how can i add a song to the layout??

  • 193. pat  |  September 27th, 2009 at 11:34 am

    how can i add a player to the layout? i’m using mixpod.com as the site for the layout

  • 194. lirio  |  November 4th, 2009 at 11:57 pm

    how can i make my photo as a whole background of my site,without appearing the sandskrit theme?this is my site liriox.multiply.com can you check it to figure out what is the problem and what are the exact code to be use? Thank’s and more power to you!

  • 195. Erik  |  January 26th, 2010 at 10:28 pm

    Sir/Mam

    bkit po kaya nag rerepeat ung header/banner ko ko? ito po un ginawa ko sa css ko..

    div.owner_nav {
    border: none;
    margin: 0 auto;
    margin-top: 20px;
    height: 310px;
    height: 130px;
    width: 760px;
    border: 10px solid #fff;
    border-bottom: none;
    padding: 113px 0 0 0;
    background: url(http://images.zabkielerikkos.multiply.com/image/1/photos/15/1200×120/1/datu.jpg?et=qEivfGnC9CudQbJI1NkdIQ&nmid=313293470); width:760px;
    background-color: #fff;
    background-position: 0 -10px;

  • 196. alee  |  March 19th, 2010 at 11:21 am

    how can i put links? i have an online shop. but i can’t seem to design it the way i want. i don’t know how to put links. please email me at [email protected]. thanks a lot!

  • 197. Aji Prabowo  |  March 19th, 2010 at 3:30 pm

    Very useful, thanks. I’m posting it to my website, pls do visit us sometimes. :)

  • 198. alee  |  March 20th, 2010 at 4:20 am

    how do i add links? i have an online shop, but i’m having difficulty adding links. help. thanks.

  • 199. klaris19  |  April 8th, 2010 at 12:24 am

    hi. im having difficulty about changing the backgrounds. :/ can you help me?.

  • 200. chari  |  July 26th, 2010 at 7:44 pm

    hi po! i just want to ask if how can i put a background on the right rail bar? Madami po kasi ako nakikita na nababago nila yung rail bar nila saka nalalagyan ng image. Thanks po sana help nyo po ako. Thanks!Ü

  • 201. jenny  |  September 12th, 2010 at 12:03 am

    I just wanted to ask what if you don’t an album or account in photobucket…. what will i use in the url part in changing your background, banner & footer.. because i wanted to use the picture or image i saw in photobucket….

    do i have to create an account in the photobucket?

    plzzz…. help me…

  • 202. gwen  |  November 4th, 2010 at 11:33 am

    hi.. can you give me advice where i can get a background like this?

    http://customizedthemes.multiply.com/photos/album/19160/Teatime_Theme#photo=1

    do i need to edit my backgroung picture so that i can have this?

  • 203. mia  |  April 28th, 2011 at 2:32 am

    hi.. paano ko po madadagdagan yun boxes sa taas ng site ko .. i.e. yung home, links, blog, etc. ty :)

  • 204. Wayne Sepe  |  May 29th, 2011 at 10:18 pm

    Where can i find the css code for the bluesy theme?

  • 205. Chrissy  |  June 13th, 2011 at 3:57 am

    I have created a navigation/menu as an image file. How will I make it work? What are the codes? Thank you!

  • 206. chaoie  |  January 9th, 2012 at 4:05 am

    Hi, I’ve been following yout tuts and it really helped me a lot in customizing my multiply site. However, this is the image I wanted to have and I can’t seem to find other tuts regarding customizing it to the fullest.

    http://brusselsprouts.multiply.com/

    as you can see, this has 2 navigation tabs and there is no visitors page and rail page. That’s what I wanted to attain. Can you help me?

  • 207. Lloyd Samson  |  July 7th, 2012 at 3:51 am

    hi! I created a website using Macromedia Flash 8, I use the extension nmn .swf file

    How can i import it in css section?

Leave a Comment

Required

Required, hidden

Some HTML allowed:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Trackback this post  |  Subscribe to the comments via RSS Feed


Calendar

April 2014
S M T W T F S
« Jan    
 12345
6789101112
13141516171819
20212223242526
27282930  

Most Recent Posts